X
Lightly press bulb ?, turn it counter-clock-
wise and pull it out.
X
Insert the new bulb and, applying slight
pressure, turn it clockwise until it engages.
X
Insert the bulb holder into housing ;.
X
Attach dust cover =.
X
Insert housing ;.
X
Replace and tighten screws :.
Windshield wipers
Switching the windshield wipers
on/off
If the wiper blades are worn, the windshield
will no longer be wiped properly. This could
prevent you from observing the traffic condi-
tions, thereby causing an accident.
Combination switch
1
$ Windshield wipers off
2
Ä Intermittent wipe, low (rain sensor
set to low sensitivity)
3
Å Intermittent wipe, high (rain sensor
set to high sensitivity)
4
° Continuous wipe, slow
5
¯ Continuous wipe, fast
B
í Single wipe
C
î To wipe with washer fluid
X
Switch on the ignition.
X
Turn the combination switch to the corre-
sponding position.
In the Ä or Å position, the appropriate
wiping frequency is set automatically accord-
ing to the intensity of the rain. In the Å
position, the rain sensor is more sensitive
than in the Ä position, causing the wind-
shield wipers to wipe more frequently.
Switching the rear window wiper on/
off
Combination switch
:
è Switch
2
b Wipes with washer fluid
3
I Switches on intermittent wiping
4
0 Switches off intermittent wiping
5
b Wipes with washer fluid
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Turn switch : on the combination switch
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.
i
The rear window wiper comes on auto-
matically if you shift the selector lever to R
while the windshield wiper are on.
Windshield wipers
95
Lights and windshield wipers
Z
To Next Page
Loading...
Need help?
General
