Display messages
Possible causes/consequences and MM Solutions
5
Engine Oil Level Cannot Be
Measured
*The electrical connection to the oil level sensor has been interrupted or the oil level sensor is faulty.
#
Consult a qualified specialist workshop.
Warning and indicator lamps
Overview of indicator and warning lamps
Some systems will perform a self-test when the
ignition is switched on. Some indicator and
warning lamps may briefly light up or flash. This
behavior is non-critical. These indicator and
warning lamps indicate a malfunction only if they
light up or flash after the engine has been star‐
ted or during a journey.
Instrument Display
Depending on the display setting, the positions
of the indicator lamps on the Instrument Display
may differ from the example shown.
Progressive setting
If you select the Progressive display setting, the
positions of the indicator lamps on the Instru‐
ment Display will change.
452
Display messages and warning/indicator lamps
To Next Page
Loading...
Need help?
General
