Notes on the Instrument Display and on-
board computer
Additional notes regarding your Mercedes-AMG
vehicle:
R
If you select the Performance menu, the
upshift bar will appear on the multifunction
display.
R
If you switch on the ECO start/stop function
and select drive program A, the engine
electronics will switch from eight-cylinder
mode to four-cylinder mode, if necessary.
The multifunction display will show the /
symbol in the status area.
R
Additional note regarding the indicator and
warning lamps: the vehicle is also equipped
with the ESP
®
÷, ESP
®
OFF å and
ESP
®
SPORT Æ indicator and warning
lamps (/ page 44).
R
You can select the following display content
in Mercedes-AMG vehicles with a Wide‐
screen Cockpit:
-
Tachometer (classic display setting)
-
Tachometer and gear display (classic dis‐
play setting)
-
Date (progressive display setting)
-
Date and gear display
-
Warm-up
-
Engine data
-
G-meter
-
Trip computer
-
Navigation
Operating the on-board computer
&
WARNING Risk of distraction from infor‐
mation systems and communications
equipment
If you operate information and communica‐
tion equipment integrated in the vehicle
when driving, you will be distracted from the
traffic situation. This could also cause you to
lose control of the vehicle.
#
Only operate this equipment when the
traffic situation permits.
#
If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
Observe the legal requirements for the country
in which you are currently driving when operat‐
ing the on-board computer.
%
The on-board computer displays will appear
on the multifunction display.
Instrument Display and on-board computer
25
To Next Page
Loading...
Need help?
General
