Overview of the tire-change tool kit
Apart from some country-specific variants, vehi‐
cles are not equipped with a tire-change tool kit.
For more information on which tire-changing
tools are required and approved for performing a
wheel change on your vehicle, consult a qualified
specialist workshop.
Required tire-change tool kit may include, for
example:
R
Jack
R
Chock
R
Lug wrench
R
Alignment bolt
The tire-change tool kit is in a well in the stow‐
age space under the trunk floor.
1
Folding chock
2
Ratchet
3
Socket
4
Lug wrench
5
Towing eye
6
Jacking support
7
Jack
8
Alignment bolt
Changing a wheel
#
Be sure to also observe the notes on chang‐
ing a wheel in the Operator's Manual of your
vehicle.
Vehicles with AMG ceramic high-perform‐
ance composite braking system:
*
NOTE Damage to the ceramic brake disk
when changing a wheel
Mercedes-AMG vehicles with ceramic
brake disks: during removal and reposition‐
ing of the wheel, the wheel rim may strike
the ceramic brake disk and damage it.
#
Take particular care.
#
Ask another person for assistance or
use a second centering pin.
#
When changing the wheel, avoid exerting any
force on the brake discs.
This can lead to impaired comfort during
braking.
Installing/removing the longitudinal mem‐
ber panel
To protect the vehicle body, the vehicle has cov‐
ers installed next to the jack support points on
the longitudinal member panels.
Wheels and tires
37
To Next Page
Loading...
Need help?
General
