MAINTENANCE
121
• Belt surfaces roughened.
• Signs of wear on edges or outer surfaces of belt.
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt support
lever.
ob00687
2. Remove fill cap and check fluid level. The fluid level should be
even with the bottom of the fill hole. Add Quicksilver or
Mercury Precision Lubricants Power Trim & Steering Fluid. If
not available, use automotive (ATF) automatic transmission
fluid.
ob01095
Tube Ref No. Description Where Used Part No.
114
Power Trim and
Steering Fluid
Power trim system 92-802880A1
To Next Page
Loading...
Need help?
General
