Fluid Ford Part
Name
Application Capacity
Engine coolant
2
Motorcraft
Premium Gold
Engine Coolant
(yellow-colored)
2.3L I4 engine
with automatic
or manual
transaxle
8.56 quarts
(8.1L)
3.0L V6 Duratec
engine with
automatic
transaxle
9.72 quarts
(9.2L)
Transmission
fluid
Motorcraft SAE
75W-90 gear oil
(non-synthetic)
Manual transaxle 3.0 quarts
(2.87L)
3
Motorcraft FNR5
Automatic
Transmission
Fluid
5–speed
automatic
transaxle
7 quarts (6.7L)
4
Premium
Automatic
Transmission
Fluid
6–speed
automatic
transaxle
7.4 quarts
(7.0L)
4
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
All 4.75 quarts
(4.5L)
1
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.
2
Add the coolant type originally equipped in your vehicle.
3
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
4
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
2006 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
242
To Next Page
Loading...
Need help?
General
