Automatic Temperature Control (ATC) system with heated seats
(if equipped)
Temperature conversion: To switch between Fahrenheit and Celsius:
If your vehicle is equipped with a full message center, refer to Units
(Fahrenheit/Celsius) in the Driver Controls chapter.
If your vehicle is equipped with a mini message center, refer to Mini
message center electronic compass temperature display in the Driver
Controls Chapter.
MAX A/C setting: In order to achieve maximum cooling performance,
press
, A/C, , and set the temperature to 60° F (16° C) and the
highest blower setting.
1.
Defrost: Distributes outside air through the windshield defroster
and demister vents. Can be used to clear thin ice or fog from the
windshield. To exit
select another mode.
2.
Fan speed control: Press to manually increase or decrease the
fan speed. To return to automatic fan operation, press AUTO.
3.
R
Rear defroster: Press to defrost the rear window. Refer to
Rear window defroster in this section for more information. If your
vehicle is equipped with both rear defroster and heated mirrors, the
same button will activate both.
4.
Passenger heated seat control: Press to heat the passenger
seat. Press once to activate high heat (two indicator lights). Press again
to activate low heat (one indicator light). Press again to deactivate the
2006 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
30
To Next Page
Need help?
General
