2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be checked by a qualified
technician.
3
Add the coolant type originally equipped in your vehicle.
4
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only have the API Certification mark and meet the requirements
of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L).
LUBRICANT SPECIFICATIONS
Item
Ford Part
Name or
equivalent
Ford Part
Number
Ford
Specification
Brake fluid
Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
PM-1 or PM-1-C ESA-M6C25 -A
Body hinges,
latches, door
striker plates
and rotors, seat
tracks, fuel filler
door hinge and
spring, hood
latch, auxiliary
latch, seat
tracks
Multi-Purpose
Grease
XG–4 or XL-5 ESB-M1C93–B
Door
weatherstrips
Silicone Spray
Lubricant
XL-6 ESR-M13P4-A
Lock cylinders
Motorcraft
Penetrating and
Lock Lubricant
XL-1 none
Driveshaft, slip
spline, universal
joints
Premium Long
Life Grease
XG-1-C ESA-M1C75-B
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
323
To Next Page
Loading...
Need help?
General
