To Next Page

To Previous Page

1. To disable/enable the autounlock

feature, select this function from the

SETUP MENU.

2. Press and hold the TRIP/RESET

control switch to turn the

autounlock ON or OFF.

3. Press the TRIP/RESET control switch for the next SETUP MENU item

or wait for more than 4 seconds return to the INFO MENU.

Reverse Sensing System (Park Aid) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near

the rear bumper, and functions only when R (Reverse) gear is selected.

1. To disable/enable the reverse

sensing system feature with the

vehicle in P (Park), select this

function from the SETUP MENU or

put the vehicle in R (Reverse).

2. Press and hold the TRIP/RESET

control switch to turn the park aid ON or OFF.

3. Press the TRIP/RESET control switch for the next SETUP MENU item

or wait for more than 4 seconds return to the INFO MENU.

Oil Life Start Value

1. Select this function from the

SETUP MENU for the current

display mode.

2. Press and hold the TRIP/RESET

control switch to reset oil change.

3. Press the TRIP/RESET control

switch for the next SETUP MENU item or wait for more than 4 seconds

return to the INFO MENU.

Note: Oil Life Start Value of 100% equals 5,000 miles (8,000 km) and

180 days. Setting Oil Life Start Value to 60% sets the Oil Life Start Value

to 3,000 miles (4,828 km) and 120 days.

Compass display

The compass heading is displayed as one of N, NE, E, SE, S, SW, W and

NW in the message center display.

2006 Mountaineer (mnt)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

Mercury 2006 Mountaineer User Manual

Questions and Answers: