4. Recirculation control: Press to activate/deactivate air
recirculation in cabin. Recirculated air may reduce the amount of time to
cool down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculation can be
engaged manually in any other airflow selection except
(defrost).
Recirculation may turn off automatically in all airflow selections except
MAX A/C.
5. A/C control: Press to activate/deactivate air conditioning. Use with
recirculated air to improve cooling performance and efficiency. Engages
automatically in AUTO,
(defrost) and (floor/defrost).
6.
: Distributes air through the windshield defroster ducts, demister
outlets, and the front and rear seat floor ducts. The system will
automatically provide outside air to reduce window fogging.
7.
: Distributes air through the floor and rear seat floor ducts.
8.
: Distributes air through the instrument panel and center console
registers (if equipped) and the front and rear seat floor ducts.
9.
: Distributes air through the instrument panel and center console
registers (if equipped).
10. Manual override controls: Allows you to manually select where
airflow is directed. To return to full automatic control, press AUTO.
11. OFF: Outside air is shut out and the fan will not operate.
12. Temperature control: Controls the temperature in the cabin of the
vehicle. Press to increase/decrease the temperature.
13. AUTO: To engage automatic temperature control, press AUTO and
select the desired temperature using the temperature control. The
system will automatically determine fan speed, airflow location, A/C on
or off, and outside or recirculated air, to heat or cool the vehicle to reach
the desired temperature.
14. EXT: Press to display outside temperature. Press again to display
cabin temperature settings.
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
47
To Next Page
Loading...
Need help?
General
