EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and engine
specifications directly related to emissions, is placed on the engine at time of
manufacture.
a - Piston displacement
b - Maximum emission output for the engine family
c - Percent of fuel line permeation
d - Timing specification
e - Family number
f - Engine family description
g - Engine power ‑ kilowatts
h - Idle speed
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine maintenance performed
to maintain emission levels within prescribed certification standards.
The owner/operator is not to modify the engine in any manner that would alter
the horsepower or allow emission levels to exceed their predetermined factory
specifications.
Inspection and Maintenance Schedule
BEFORE EACH USE
•
Check engine oil level. See Fuel and Oil ‑ Checking Engine Oil.
• Check that lanyard stop switch stops the engine.
• Visually inspect the fuel system for deterioration or leaks.
• Check outboard for tightness on transom.
• Check steering system for binding or loose components.
• Remote control models ‑ Visually check steering link rod fasteners for
proper tightness. See Steering Link Rod Fasteners.
• Check propeller blades for damage.
2008
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
THIS ENGINE CONFORMS TO 2010 CALIFORNIA AND U.S. EPA EMISSION
REGULATIONS FOR SPARK IGNITION MARINE ENGINES. REFER TO OWNER’S
MANUAL FOR REQUIRED MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
PLEASE PERFORM THE ENGINE MAINTENANCE CORRECTLY.
FAMILY :
MERCURY MARINE
EMISSION CONTROL INFORMATION
a
DISPLACEMENT :
FEL : HC+NOx=
LOW-PERM/HIGH-PERM :
TIMING :
IDLE SPEED (IN GEAR) :
MAXIMUM POWER :
HP :
2008
b
c
d
e
f
g
h
43058
CO=
To Next Page
Loading...
Need help?
General
