Mercury 4-STROKE User Manual

3. Disengage the tilt support lever by raising the outboard off the support
lever and lifting the knob. Lower the outboard.
a - Tilt support lever
b - Knob
Setting The Transom Angle Of Your Outboard
The vertical transom angle of your outboard is adjusted by changing the
position of the preset tilt knob in one of the three adjustment holes provided.
Proper adjustment allows the boat to achieve optimum performance, stability,
and minimize steering effort.
NOTE: Refer to the following lists when adjusting the transom angle of your
outboard.
The preset tilt knob should be adjusted so the outboard is positioned to run
perpendicular to the water when the boat is running at full speed. This allows
the boat to be driven parallel to the water.
a
b
4650
FEATURES AND CONTROLS
60 eng

Mercury 4-STROKE Specifications

General

Brand	Mercury
Model	4-STROKE
Category	Outboard Motor
Language	English