Mercury 40 Operator's Manual

MAINTENANCE
58
ob00428
!
WARNING
The end of the steering cable must be fully retracted into the outboard tilt tube before adding lubricant. Adding
lubricant to steering cable when fully extended could cause steering cable to become hydraulically locked. A
hydraulically locked steering cable will cause loss of steering control, possibly resulting in serious injury or
death.
• Steering Cable Grease Fitting (If equipped) ‑ Rotate steering wheel to fully retract the steering cable
end into the outboard tilt tube. Lubricate through fitting.
a
b
ob00432
a - Fitting b - Steering cable end
3. Lubricate the following with light weight oil.
• Steering Link Rod Pivot Points ‑ Lubricate points.
ob00433
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt support lock.

Mercury 40 Specifications

General

Brand	Mercury
Model	40
Category	Outboard Motor
Language	English