75, 90 and 115 (4-STROKE) INSTALLATION MANUAL
Page 2 of 18
Start in Gear Protection
The remote control connected to the outboard must be equipped with a start-in-gear
protection device. This prevents the engine from starting in gear.
WARNING
Avoid serious injury or death from a sudden unexpected acceleration when starting
your engine. The design of this outboard requires that the remote control used with
it must have a built in start-in-gear protection device.
Selecting Accessories For The Outboard
Genuine Quicksilver Parts and Accessories have been specifically designed and tested for
this outboard.
Some accessories not manufactured or sold by Quicksilver are not designed to be safely
used with this outboard or outboard operating system. Acquire and read the Installation,
Operation, and Maintenance manuals for all selected accessories.
Installation Specifications
a
b
a
a – Transom Opening – Minimum
Single Engine – 33 in. (838.2)
Dual Engines – 59 in. (1498.6 mm)
b – Engine Center Line For Dual Engine
26 in. (660mm) Minimum
To Next Page
Loading...
Need help?
General
