Description
Model
200 240 270
ISO 6185 parts 1‑II 1‑II 1‑II
Tube fabric PVC PVC PVC
Boat bottom/keel
fabric
Same as tube
fabric
Same as tube
fabric
Same as tube
fabric
Air floor fabric PVC PVC PVC
Manufacturer's Plate
The manufacturer's plate is located on the inside of the boat transom.
Example manufacturer's plate; refer to the plate on your boat for product
specific ratings
a - Model number
b - Maximum outboard power
c - Maximum number of people
d - Maximum load capacity—people + outboard + fuel tank and equipment
e - Air chamber pressure
f - ISO 6185 part (Refer to general information following)
g - Boat design category—refer to the following table
h - Maximum outboard weight
Boat design category—The following table shows the navigation use that the
boat was designed and constructed for.
To Next Page
Loading...
Need help?
General