Inflating
NOTICE
Overinflation may result in damaged seams or bulkheads. Do not use a
compressed air source to fill the air chambers.
IMPORTANT: Do not inflate or deflate one air chamber at a time. When
inflating or deflating, maintain a balanced air pressure between the air
chambers to prevent stress or potential damage to the inside diaphragms that
separate the air chambers.
a - Valve stem
b - Closed position
c - Open position
d - Valve cap
HAND PUMP
The hand pump can be operated as a single‑action or double‑action pump.
Close the valve on the pump to operate it as a double‑action pump. Open the
valve to operate it as a single‑action pump.
The hand pump has two modes of operation: inflate and deflate.
1. Insert and lock the air pressure gauge into the pump handle port marked
"INFLATE."
2. Insert and lock the air pump hose into the air pressure gauge.
To Next Page
Loading...
Need help?
General