Mercury MerCruiser 5.7 MPI User Manual

Section 5 - Maintenance
Page 66 90-899883173 DECEMBER 2007
4. Pull tether through the bilge drain.
f
e
d
c
b
a
7284
a - Bilge drain plug
b - Tether
c - Clip
d - Oil drain hose plug
e - Oil drain hose
f - Bilge drain flange
5. Place the oil drain hose in a suitable container.
6. Remove the drain plug from the oil drain hose.
7. After oil has drained completely, install the drain plug in the oil drain hose.
8. Push the hose through bilge drain and install the plug.
9. Replace the engine oil filter. See Changing the Oil Filter.
Engine Oil Drain Pump
1. Loosen the oil filter to vent the system.
2. Remove the dipstick.
3. Install the oil pump onto the dipstick tube.
mc70571-1
a
c
b
a - Oil pump
b - Dipstick tube
c - Oil drain hose
4. Insert the hose end of the crankcase oil pump onto an appropriate container and usie
the handle to pump until the crankcase is empty.
5. Remove the pump.
6. Install the dipstick.

Mercury MerCruiser 5.7 MPI Specifications

General

Brand	Mercury
Model	MerCruiser 5.7 MPI
Category	Engine
Language	English