EasyManuals Logo
Home>Mercury>Automobile>Mountaineer 2002

Mercury Mountaineer 2002 User Manual

Mercury Mountaineer 2002
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
P (Park)
To put your vehicle in gear, start the engine, depress the brake pedal,
then move gearshift lever out of P (Park).
Always come to a complete stop
before shifting into P (Park). Make
sure the gearshift lever is securely
latched in P (Park). This position locks the transmission and prevents
the rear wheels from turning.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
N (Neutral)
With the gearshift lever in N
(Neutral), the vehicle can be started
and is free to roll. Hold the brake
pedal down while in this position.
D (Overdrive)
The normal driving position for the
best fuel economy. Transmission
operates in gears one through five.D
(Overdrive) can be deactivated by
pressing the transmission control
switch on the end of the gearshift
lever.
The transmission control indicator
light (TCIL) will illuminate on the
instrument cluster.
O/D
OFF
Driving
184

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury Mountaineer 2002 and is the answer not in the manual?

Mercury Mountaineer 2002 Specifications

General IconGeneral
BrandMercury
ModelMountaineer 2002
CategoryAutomobile
LanguageEnglish

Related product manuals