7.
Complete all of the required data fields. When finished, select the Create button.
8.
Power up the SmartCraft CONNECT and all other vessel components, select Find My Device. Select the SmartCraft
CONNECT device.
9. Enter the SmartCraft CONNECT serial number. This can be found on the side of the module, or by querying the list of the
NMEA devices on the vessel network, using an MFD display. After entering the serial number, select Save.
SCC-1 SMARTCRAFT CONNECT GATEWAY INSTALLATION MANUAL
Page8 / 23 © 2023 Mercury Marine 90-8M0219240 eng MAY2023
To Next Page
Need help?
General
