MAINTENANCE
15
Trolling Motor Care
To keep your trolling motor in the best operating condition and retain its
dependability, it is important that your trolling motor receive periodic
inspections and maintenance. We urge you to keep it maintained
properly to ensure the safety of you and your passengers.
!
WARNING
Neglecting to inspect, maintain, or repair your trolling motor can result
in product damage or serious injury or death. Do not perform
maintenance or service on your trolling motor if you are not familiar
with the correct service and safety procedures.
Record maintenance performed in the Maintenance Log at the back
of this book. Save all maintenance work orders and receipts.
SELECTING REPLACEMENT PARTS
We recommend using original MotorGuide Certified Tough replacement
parts.
Inspection and Maintenance Schedule
BEFORE EACH USE
• Check the tightness of the battery lead connections.
• Visually inspect for loose or corroded wiring connections.
• Check the tightness of the propeller nut.
• Check the propeller blades for damage.
AFTER EACH USE
• Disconnect the battery cables from the power source.
• Check the propeller and the propeller shaft for debris such as
weeds and fishing line. Remove all debris.
• Check the tightness of the propeller nut.
• Rinse the trolling motor with clean water to remove dirt and dust
that may scratch the surface.
EVERY 100 HOURS OF USE OR ANNUALLY
• Periodically lubricate all the pivot points. Refer to Pivot Points.
• Check the tightness of bolts, nuts, and other fasteners.
To Next Page
Loading...
Need help?
General