MIDI CONTROL CHANGE NUMBERS
In addition to supporting Midi Program Change Numbers, the amp also accepts
Midi Control Change Numbers (messages... also known as Midi Continuous Controllers or CC messages).
When using a Midi Footcontroller capable of sending CC messages, you can assign buttons on the Footcontroller for direct-control
or instant-access to individual functions on the amp, which allows any Midi Footcontroller to act as a dedicated JP-2C Footswitch.
Typically you would control the amplifier using either Midi Control Change Numbers or Midi Program Change Numbers, but not both,
though it is possible. Using Midi Program Change Numbers saves presets in the amp’s memory, but does not allow instant-access
to the JP-2C’s Channels and Features (EQ, Reverb, Loop) from a Midi Footcontroller. Using Midi Control Change Numbers saves
preset combinations in the Midi Footcontroller’s memory, and does provide instant-access to the amp’s channels and on/off functions.
Whenever a Midi Control Change Number is received on the same Midi Channel as selected by the Midi Channel rotary DIP switch,
the STORE LED will flash quickly, indicating a valid Midi message has been received.
NOTE: If you experience any odd or unexpected Midi behaviour, it is more than likely a result of the JP-2C receiving both Midi Control
Change and Program Change Numbers at the same time, ensure this is not the case before contacting us for support.
JP2C MIDI CONTROL CHANGE NUMBER ASSIGNMENT
Amp
Function
MIDI CC
Number Control Values Comments
CH1 20 64 - 127 (ON) CH2 and CH3 will turn off automatically
CH2 21 64 - 127 (ON) CH1 and CH3 will turn off automatically
CH3 22 64 - 127 (ON) CH1 and CH2 will turn off automatically
EQ1 23
0 - 63 (OFF)
64 - 127 (ON)
EQ2 24
0 - 63 (OFF)
64 - 127 (ON)
FXLP 25
0 - 63 (OFF)
64 - 127 (ON)
RVRB 26
0 - 63 (OFF)
64 - 127 (ON)
SHRD 27
0 - 63 (OFF)
64 - 127 (ON)
CH1 & EQ 28 64 - 127 (ON)
CH2 and CH3 will turn off automatically
EQ1 & EQ2 will turn on/off per the toggle
CH2, EQ & SHRD 29 64 - 127 (ON)
CH1 and CH3 will turn off automatically
EQ1/EQ2, & SHRD will turn on/off per the toggles
CH3, EQ & SHRD 30 64 - 127 (ON)
CH1 and CH2 will turn off automatically
EQ1/EQ2, & SHRD will turn on/off per the toggles
Notes:
(1) CC#20-#24 & CC#27 should not be sent if using CC#28-#30.
(2) CC#20-#22 are mutually exclusive, most recent received takes priority.
(3) CC#23-#24 are mutually exclusive, most recent received takes priority.
(4) CC#28-#30 are mutually exclusive, most recent received takes priority.
PAGE 29
To Next Page
Loading...
Need help?
General
