Digital Proximity System
Installaon Manual
1180
Doc# 100545 • REV C (May 2016)
The DPS (Digital Proximity System) family
consists of two devices, the MX2033 and
MX2034. The MX2033 is a convenonal
3-wire driver while the MX2034 is a two-
wire current loop transmier. Users can con-
gure either unit to measure peak-to-peak
vibraon, gap distance, or rotaonal speed.
These products are used in conjuncon with
a proximity probe and extension cable to
measure the vibraon levels, gap distances,
or rotaonal speed of machinery shas.
Users can also congure the units via a USB
cable and conguraon soware.
To Next Page
Need help?
General
