Digital Proximity System
Operaon and Maintenance Manual
100576 • REV C
The DPS (Digital Proximity System) devices
consists of two modules: the MX2033 and
MX2034. The MX2033 is a convenonal
3-wire driver while the MX2034 is a two-
wire current loop transmier. Users can con-
gure either unit to measure peak-to-peak
vibraon, gap distance, or rotaonal speed.
These products are used in conjuncon with
a proximity probe and extension cable to
measure the vibraon levels, gap distances,
or rotaonal speed of machinery shas. Us-
ers can congure the units via a USB cable
and conguraon soware.
To Next Page
Need help?
General
