Contents
2
1 PRECAUTION ………………….………………..…………………………………………………. 3
1.1 Safety Precautions
1.2 Servicing Precaution
1.3 Cautions For Safety
2 PRODUCT SPECIFICATIONS ……………………………………………………………….. 7
3 USER MANUAL …………………………………………………………………………………. 17
4 WIRING DIAGRAM /PCB LAYOUT ………………………………………………………… 18
5 FACTORY PATT DETECTION …………….…………………………………………………… 20
6 MALFUNCTIONS CODES AND EXPLANATIONS ……………………………………… 24
7 TROUBLESHOOTING …………………………………………………………………………… 27
7.1 Maintenance non-heating malfunction
7.2 Door non-locked & its maintenance
7.3 Door non-locked & its maintenance
7.4 Heating beyond the setting temperature its maintenance
7.5 Maintenance of non-drain or drain exceed the setting time
7.6 Water inlet overflow malfunction maintenance
7.7 Drum non-rotating malfunction maintenance
7.8 Maintenance water inlet and water outlet at the same time
8 CHECK POINT OF CIRCUIT …………………………………………………………………… 37
9 UNPACKING WAYS OF MAIN PARTS ……………………………………………………… 40
9.1. Undo the back cover
9.2. Undo top cover
9.3. Undo the control panel and PCB
9.4. Undo the door assembly
9.5. Undo the front plate
9.6. Undo the detergent box
9.7. Undo the inlet valve
9.8. Undo the pressure switch
9.9. Undo the drain pump
9.10. Undo the pulley and motor
9.11. Undo the absorber pin from the cabinet
9.12.Undo the drum tub assembly
9.13. Undo the absorber pin from the drum
9.14.Undo the heater and NTC
10 SERVICE TOOLS ……..…………………………………………………………………………. 47
To Next Page
Loading...
Need help?
General
