Page 10
Key Pad Features
NOTICE
The appearance of the control panel on your unit may vary slightly. Functions will
be similar.
OPERATING INSTRUCTIONS
Power Button
(connect)
Up/Down
Buttons
Fan Button
and Indicators
(reset filter)
Mode Button
and Indicators
Filter Indicator
LED DisplayBucketless
Indicator
Timer Button
and Indicator
Fill Level
Button and
Indicators
Pump
Indicator
(some models)
Network
Connection
Indicator
Pump Icon
(some models)
Operating Instructions
Power Button:
Press this button to turn the unit On/Off.
Connect:
Holding the power button for 3 seconds
will place the unit in network connection
mode to setup wireless control.
Up/Down Buttons:
Press these buttons to adjust the setpoint
or to set the time feature.
Pump:
Holding the Up and Down buttons for 3
seconds will activate pump mode if the
bucket is in place (some models).
Fan Button:
Press this button to change the fan speed
between High and Low.
Filter Reset:
To reset the change filter indicator, hold
the fan button for 3 seconds.
When you push the button to change operation modes, the unit will make a beep
sound to indicate that it is changing modes.
Operating
Instructions
To Next Page
Loading...
Need help?
General
