Service Manual_2023-V2.0
52
9.2 Temperature control
9.2.1 Temperature setting of refrigerating chamber
Unlock the display control panel first. Press “REF. TEMP” button, then press “REF.TEMP” to
adjust temperature, the setting temperature is changed circularly as below. Click the LOCK button
to take effect.
7℃→6℃... →1℃→7℃……
44℉→43℉... →34℉→44℉……
9.2.2Temperature setting of freezing chamber
Unlock the display control panel first. Press “FRZ. TEMP” button, and then press “FRZ. TEMP” to
adjust temperature, the setting temperature is changed circularly as below. Click the LOCK button
to take effect.
-14℃→-15℃... →-22℃→-14℃……
7℉→6℉... →-7℉→7℉……
9.3 Mode setting
9.3.1 Super freeze mode
Unlock the display control panel first. Press the “FRZ. TEMP” button for three seconds and the
SUPER FRZ icon will light up. The temperature of freezing is -22℃ (-7℉). Click the LOCK button to
take effect. Automatically exit for up to 26 hours.
9.3.2 Super cooling mode
Unlock the display control panel first. Press the “REF. TEMP” button for three seconds and the
SUPER COOL icon will light up. The temperature of refrigerating chamber is set to 1℃ (34℉). Click
the LOCK button to take effect. Automatically exit for up to 6 hours.
9.3.3 Energy saving mode
1) Unlock the display control panel first. Press the ENERGY SAVING button once and the indicator
will light up. Click the LOCK button to take effect.
This mode sets the temperature in the refrigerator at 7℃（44℉）and the temperature in the
freezer at -14℃（7℉）.
2) Unlock the display control panel first. Press the ENERGY SAVING button once more to exit this
mode, and the refrigeration and freezer will return to the original set temperature. Click the LOCK
button to take effect.
9.3.4 Ice cubes / Ice-water selection on dispenser
Select “CUBED”, “WATER” or “CRUSHED” button on the dispenser control panel, indicator will
light up. Use containers to press the pressure plate of the dispenser to get water, ice cubes or
crushed ice.
To Next Page
Loading...
Need help?
General
