Midea MAD35S1QWT User Manual

 Page 10 
Key Pad Features
NOTICE
The appearance of the control panel on your unit may vary slightly. Functions will
be similar.
OPERATING INSTRUCTIONS
Operating Instructions
Power Button:
Press this button to turn the unit On/Off.
Connect:
Holding the power button for 3 seconds
will place the unit in network connection
mode to setup wireless control.
Up/Down Buttons:
Press these buttons to adjust the setpoint
or to set the time feature.
Fan Button:
Press this button to change the fan speed
between High and Low.
Filter Reset:
To reset the change filter indicator, hold
the fan button for 3 seconds.
When you push the button to change operation modes, the unit will make a beep
sound to indicate that it is changing modes.
Operating
Instructions
Fan Button
and Indicators
(reset filter)
Mode Button
and Indicators
Timer Button
and Indicator
Fill Level
Button and
Indicators
Pump
Indicator
(some models)
Power Button
(connect)
Up/Down
Buttons
Network
Connection
Indicator
LED DisplayBucketless
Indicator
Pump:
Press and hold on the Fill level pump 3
seconds to initiate PUMP feature.
Press and hold on the Fill level pump 3
seconds again to stop PUMP
feature. Turn on the PUMP feature, the
bucket capacity cannot be selected and
the bucket capacity is at 4 step.
·
Note: It will enter the filter cleaning reminder
when the unit runs for 250 hours.
Filter Indicator

Midea MAD35S1QWT Specifications

General

Brand	Midea
Model	MAD35S1QWT
Category	Dehumidifier
Language	English