Safety
Pr
ecautions
Opera
ting
Requirements
Parts and
F
eatures
Start Up
Guide
Contr
ols
Dishw
asher
Loading
Dishw
asher
Use
Dishw
asher
Care
Tr
oubleshooting
LO
AD UPPER RACK
NOTE:
The features on your dishwasher rack may vary from the drawings
shown.
IMPORTANT: Make sure the items loaded in the upper rack do not
interfere with the rotation of the middle spray arm located beneath
the upper rack. Check for interference by turning spray arm by hand.
•
Place it
ems so that the open ends face downward for cleaning and
draining.
•
Load glas
ses and cups in upper rack only. The lower rack is not
designed for glasses and cups. Damage can occur.
•
Place cups and glas
ses in the rows between tines. Placing them over
the tines can lead to breakage, water spots, and poor cleaning.
•
Small bowls, pans and other ut
ensils can be placed in the top rack.
Load bowls in the center section for best stability.
•
China, crys
tal and other delicate items must not touch each other
during dishwasher operation. Damage may occur.
•
Load plas
tic items so the force of the spray does not move them
during the cycle.
8 Place Setting
10 Place Setting
12 Place Setting
18
To Next Page
Loading...
Need help?
General
