7
Safety
Pr
ecautions
Opera
ting
Requirements
Parts and
F
eatures
Start Up
Guide
C
ontr
ols
Dishw
asher
Loading
Dishw
asher
Use
Dishw
asher
Care
T
r
oubleshooting
OPERATING REQUIREMENT
S
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
•
Electrically ground dish
washer.
•
Connect gr
ound wire to green ground connector in terminal box.
•
Do not use an ext
ension cord.
•
Failur
e to follow these instructions can result in death, fire, or
electrical
shock.
This dish
washer is designed for operation on an adequately wired
individual 120 V, 60 Hz, 15- or 20-amp fused electrical supply with copper
wire only. It is recommended that a time-delay fuse or circuit breaker is
used, and that a separate circuit serving only this appliance is provided. If
an outlet is used, the outlet should be placed in adjacent cabinet.
LOCA
TION REQUIREMENTS
•
Install wher
e dishwasher is protected from the elements. Protect
against freezing to avoid possible rupture of fill valve. Such ruptures
are not covered by the warranty. For winter storage information, see
“Storing” in the “Dishwasher Care” section.
•
Install and le
vel dishwasher on a floor that will hold the weight and in
an area suitable for its size and use.
WA
TER SUPPLY REQUIREMENTS
•
The water supply temperature should be 120°F to 150°F (49°C to
66°C).
•
The water supply must maintain water pressure between 20 and 80 psi
for sufficient flow.
To Next Page
Loading...
Need help?
General
