9
fast cool mode, the temperature controller of refrigerang chamber will recover to the previous
seng automacally.
Fast cool funcon can be used as Super freezing funcon.
Temperature control of freezing chamber
The freezing temperature is relavely low in “COLDER” posion, while the freezing temperature
is relavely high in “COLD” posion, thus, “NORMAL” posion is generally used.
When ambient temperature is high in summer, the temperature shall be in the ran
ge from
“NORMAL” to “COLD”. If the ambient temperature is above 35℃, then “COLD” posion shall
prevail.
When ambient temperature is low in winter, the temperature shall be in the range from
“NORMAL” to “COLDER”. If the ambient temperature is below 10℃, then “COLDER” posion shall
prevail.
4.2 Noise Inside the Unit!
You may noce that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caus
ed by the circulaon of the refrigerant liquid in the cooling system. It has
become more pronounced since the introducon of CFC free gases. This is not a fault and will not
affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
4.3 Tips for Keeping Food in the Unit
◆ Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid
bacterial transf
er. Keep raw meats/fishes in a container which is large enough to collect juices
and cover it properly. Place the container on the lowest shelf.
◆ Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the
unit are kept cool.
◆ To prevent transfer of favours and drying out, pack or cover the food separately. Fruit and
vegetables do not need to be wrapped.
To Next Page
Loading...
Need help?
General
