Level your washer
•
In a laundry tub - The laundry tub must be no shorter than 39-in. (99 cm)
and no higher than 96-in (244 cm) maximum.
Determine if the washer is level by checking the position of the tub or by
using a level.
Caution
Do not use your washing machine without leveling. If your washer is not
level, it may:
Extend the leveling feet only as much as is necessary. If the feet are
extended too much, your washer may vibrate.
Vibrate excessively which can cause your washer to malfunction.
Make excessive noise.
Indicate error codes E3, E4 or E5 when the washer is running.
24
1. Slide the washer into position.
2. Open the lid of the washer, then pour water into the tub to the leveling
circle. If the washer is level, the water will touch the leveling circle all
the way around. If the washer is not level, the water will only touch part
of the leveling circle.
•
•
•
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troublesho
o
ting
To Next Page
Loading...
Need help?
General
