GD Midea Refrigeration Equipment Co. Ltd Service manual for K portable Series
13
4 HOW TO DISASSEMBLE THE UNIT
4.1 Prepare the unit.
Unplug the power cord and disconnect the Air
pipe from rear of the unit.
Move the unit to a replace where water can be
poured. Remove the rubber plug from back of the
unit and drainage the water in from the unit.
Remove the water tank from the unit and pour the
water in the tank.
4.2 Remove the screws which fixed the rear
panel.
Remember to disassemble the inlet grille.
To Next Page
Loading...
Need help?
General
