7
Setting the heating mode
There are two heat settings on this heater (the default setting is High),
press the “M” button to select the heating setting.
1. High: 1500W, will illuminate.
2. Low: 750W, will illuminate.
Setting the temperature
In order to set the temperature, the heater has to be working at heating
mode: High or Low. Press the "+" or "-" button, the temperature digit
will flash, continue to press the "+" or "-" button to set the desired
temperature (temperature range: 5 - 35 °C). After about 5 seconds
without pressing, the display will show the current temperature, now the
desired temperature is set.
NOTE: If the current temperature is higher than the set temperature, the
heater will stop working, for example, you set 20°C, but room
temperature is 25°C, the heater will not work.
Timer setting
A: Setting the timer to turn heater ON automatically
In order to set this function, the heater must be turned off firstly. Press
the timer button , will illuminate and “0” will flash on the display.
Press “+” or “-“button to set the desired time (0 - 24hrs) for the heater to
turn on automatically. After the time is set, the room temperature will
show on the display.
B: Setting the timer to turn heater OFF automatically
In order to set this function, heater must be in working status. Press the
timer button , will illuminate and “0” will flash on the display. Press
“+” or “-“button to set the desired time (0 - 24hrs) for the heater to turn off
automatically. After the time is set, the room temperature will show on
the display.
C: Cancelling a timer setting
When the timer indicator is illuminated, pressing the button will cancel
the timer setting.
D: Checking the ON/OFF time
When the ON/OFF timer is set, press the to check the time setting.
To Next Page
Loading...
Need help?
General
