Service Manual_2020-V1.0
11
5)Remove the bottom hinge and screws.
6) Unscrew the hinge shaft from the right side of the
bottom hinge and move it to the left side,
then secure the bottom hinge to the bottom left side of
the refrigerator.
7) Dismantle the sleeves, hole cap, screws and door
stopper on the refrigerator door, and assemble them on
the other side.
8) Dismantle the sleeves, and assemble them on the
other side.
9)Remove the freezer door self-locking block and
stopper, save the to reuse. Take out the left self-locking
block and stopper from the accessory plastic bag in the
refrigerator and installed on the left of door.