Midea TMF No Frost Series User Manual

Service Manual_2020-V1.0
28
1）Remove the air duct components in freezing and
variable temperature chamber.
2）Disconnect all connecting terminals.
3）Remove the welding on inlet and outlet tubes.
4）Remove the evaporator.
Components on the evaporator
Defrost heater with defrost sensor and fuse, it can be
replaced separately.
1） Cut off wiring terminal
2） Cut off the band which fixes the sensor
3） Cut off the band which fixes the fuse
4） Separate the sensor and the evaporator
5） Take off the defrost heater from the supporting plate
of evaporator
7.7 Compressor case
Rear cover
None
Piping and parts in the compressor case

Midea TMF No Frost Series Specifications

General

Brand	Midea
Model	TMF No Frost Series
Category	Refrigerator
Language	English