Midea TMF No Frost Series User Manual

Service Manual_2020-V1.0
41
9.7 Test mode
All below functions are only for diagnosis and test purpose, we advise to restart the refrigerator by power
on/off if have used these functions.
Test items
Setting Method
Setting result
Enter Test Mode
Keep pressing the “SET” for 15
seconds and release
The indicator lights of gears 1, 3 and 5
are on, and the indicator lights of other
gears are off
Select to enter
into forced
defrosting mode
in all rooms
No need to operate
The compressor and the freezing fan will
stop working, the freezing defrost heater
starts to work.
In forced defrosting mode, when the
freezing defrosting sensor reach a
temperature of 12°C and the
defrosting heater has been working for
at least 3 minutes.
then the refrigerator will exit the test
mode and return to normal operation
mode
In forced defrosting mode, if the
defrosting heater has been working for
60 minutes,
then the refrigerator will exit the test
mode and return to normal operation
mode
Select to exit
the test mode
In test mode, power off or enter
standby mode
The refrigerator will exit the test mode
9.8 Demo mode（None）
9.9 Backup data for power fail
1) The running state of the refrigerator is remembered after compressor running for 1 hour
continuously.
2) The running state of the refrigerator is remembered after change function settings and lock.
3) When the refrigerator is out of power and recharged, the running state of the refrigerator is same as
before.

Midea TMF No Frost Series Specifications

General

Brand	Midea
Model	TMF No Frost Series
Category	Refrigerator
Language	English