14
1.
2. Press the Lock and buttons at the same time for three seconds
to reset the freezer to factory defaults. The panel beeps and all of
the indicators turn on for three seconds. If the compressor is
running, it pauses for five minutes, then restsrts.
The room is too warm or cold. Adjust the room’s temperature.
The ventilation openings are blocked or dusty.
There is too much frost build up.
There are door seal gaps.
Door Open Alert
If the door is open for more than five minutes, the door open alert is
activated a buzzer sounds intermittently. Close the door to turn off the
alert and check to make sure that nothing is blocking the door, preventing
it from closing. Also, check to make sure that the freezer is level. An
unlevel freezer may prevent the door from closing properly.
How do I reset my freezer to factory
defaults?
Press and hold Lock for three seconds to unlock the control panel.
To Next Page
Loading...
Need help?
General