7
Touch pad controls
Setting up your freezer
Before using your freezer
High temperature
indicator / alert
Lower temperature
button
Temperature indicator
Door open
indicator / alarm
Raise temperature
button
Quick freeze
button
Control Panel
Lock / Unlock button
Freezer / Fridge
mode button
Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction
in the cooling system from improper handling during transportation.
Wash the inside with a damp, warm cloth and a baking soda solution
(two tablespoons in a quart of water), then wipe dry with a dry cloth.
Do this periodically to keep your freezer looking new.
For proper operation, it’s very important that you level the freezer
using the leveling feet. If this is not done, the door may not close or seal
properly, causing cooling, frost and moisture problems. Turn the leveling
feet clockwise to raise that side of the freezer or counterclockwise to lower
that side. The leveling feet are easier to adjust if you have someone push
against the top of the freezer to take some weight off.
When moving your freezer, DO NOT tilt it beyond 45° from upright.
To Next Page
Loading...
Need help?
General