Silencer
(optional accessory)
To achieve even further reductions in
noise levels, a special silencer can be
fitted in the ducting system.
To minimise noise from the motor in the
kitchen, the silencer should be
positioned in front of the external motor
a if possible, or if the ducting is long,
then in the ducting above the cooker
hood itself b.
In the case of an external motor placed
inside the house (ABLG 202), fitting a
silencer behind the external motor c
reduces the noise of the motor outside
the house.
In all modes of operation, the most
effective noise reductions are
achieved if two silencers are fitted
one behind the other in the system.
Connection for air extraction
22
To Next Page
Loading...
Need help?
General
