Profiles
35
(CM5410, CM5510, CM5710)
In addition to the Miele drinks menu
(Miele profile), you can create individual
profiles to cater for different tastes and
preferences.
Within the profile, you can adjust the
portion sizes and parameters
individually for all drinks.
The name of the current profile is
shown in the top left of the display.
Creating profiles
Touch the sensor control and
select Profiles. Confirm withOK.
TheProfilesmenu opens.
Select Create profile.
The editor will open in the display.
Enter the profile name:
- To enter a character, highlight the one
you want and confirm your choice
withOK.
- To delete a character, touch the
sensor control.
- To save the name, select the tick
and confirm withOK.
The profile has been created.
Changing drinks within a
profile
When you change the parameters
within a profile, these settings only
apply to the active profile. The settings
for drinks contained within other
profiles remain unaffected.
Select the profile you want.
The name of the selected profile is
shown in the top left of the display.
You can now change the drinks
individually.
Making drinks stored in a
profile
Place a suitable container underneath
the central spout.
Touch the sensor control and
select Profiles.
Select the profile you want and
confirm withOK.
Select the drink you want.
The machine starts dispensing the
drink.
Changing the name
This option is only possible if a profile
has been allocated in addition to the
Miele standard profile.
Select Change name with the arrow
sensors and touch OK.
Now proceed as described in
“Creating a profile”:
- Select to delete a character,
- To enter new characters, highlight the
relevant character and confirm with
OK,
- Save the new name by selecting in
the display and touching OK.
Deleting a profile
This option can only be selected if a
profile has been allocated in addition
to the Miele standard profile.
To Next Page
Loading...
Need help?
General
