If the milk pipe is blocked, clean it
under running water with the brush
supplied.
^
Insert the brush in the tube and move
it back and forth as far as it will go
until all milk residue has been
removed.
^
Fit the dispensing unit back together.
^
Push the dispensing unit back onto
the central spout. Press firmly to
ensure the spouts at the bottom
connect correctly with the edge of
the dispenser.
^ Replace the stainless steel cover and
connect the milk pipe if applicable.
Milk flask
(optional accessory, not supplied with
the machine)
The milk flask should be taken apart
and cleaned every day.
^
Clean all parts by hand only using
hot water and a little washing-up
liquid. Use the cleaning brush
supplied to remove milk residues
from the milk pipework if necessary.
^
Rinse all parts carefully under
running water. Residual washing-up
liquid can affect the taste of milk from
the machine and the quality of the
milk froth. Dry all parts afterwards.
^ Reassemble the milk flask.
Cleaning and care
42
To Next Page
Loading...
Need help?
General
