Preparing drinks
34
Place the milk flask to the right next
to the coffee machine.
Attach the milk pipework rinse valve
to the milk flask lid.
Connect the milk flask to the coffee
machine by attaching the milk
pipework to the aperture in the
central spout.
If you have not made any milk drinks
for a while, rinse the milk pipework
thoroughly before making the first
drink.
Making a coffee drink
Place a cup under the central spout.
Select a drink: touch the sensor
button for the drink you want. Or
select a drink from the Additional|
Additional drinks menu (sensor
button).
Dispensing will start.
Cancelling a drink
Tap the lit orange symbol on the
control panel again.
When preparing drinks with several
ingredients (e.g., latte macchiato) you
can cancel each of the individual
components prematurely.
TapOK when Stop appears on the
display.
DoubleShot
Select the DoubleShot function if
you would like a particularly strong and
aromatic coffee. In this case, more
coffee beans will be ground and brewed
halfway through brewing. The shorter
extraction time means that fewer
unwanted aromas and bitter
compounds will be released.
DoubleShot can be activated for all
drinks apart from “Ristretto”.
Making a DoubleShot of coffee
Press the sensor button
immediately before or after you start
making a drink.
Dispensing starts and the sensor
button lights up. 2portions of coffee
beans will be ground and brewed.
To Next Page
Loading...
Need help?
General
