Settings
47
Displaying and changing
Settings
The drinks menu is displayed.
Touch the sensor button.
Select Settings and tapOK.
Select the menu option that you want
to display or change.
Confirm withOK.
Change the setting as required and
confirm withOK.
Some settings which can be found in
the Settings menu are described in
separate sections of the operating
instructions.
Language
You can select the language and, if
applicable, your location for all display
text.
Useful tip: If you select the wrong
language by mistake, you can find the
Language option again via the
symbol.
Timer: switch off after
If none of the buttons have been
pressed or no drink has been prepared,
the coffee machine will switch itself off
after 20minutes to save energy.
You can change this to another time
(can be set between 20minutes and
9hours).
TeaTimer
You can use the TeaTimer to start a
minute minder when making tea (see
“Making drinks – TeaTimer”).
Volume
You can set the volume of the audible
signal and keypad tones (segment bar).
Display brightness
You can set the display brightness
(segment bar).
Lighting
You can change the brightness of the
lighting while the coffee machine is
switched on or off.
You can also specify how long the
lighting should stay on for when the
machine is switched off (adjustable
between 15minutes and 9hours).
Info (display information)
You can display the number of drinks
dispensed so far and how many more
can be dispensed until the maintenance
programs have to be run.
Altitude
If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a lower
temperature. You can set the local
altitude of the machine to ensure that
the correct temperatures are achieved.
Performance Mode
You can select the appropriate
Performance mode for how you use
your machine. Eco Mode is set by
default.