Grinder setting
34
When the beans are ground correctly,
the coffee or espresso will flow evenly
into the cup with a good crema.
The crema should have an even
nutbrown colour.
The grinder setting you select will be
used for all coffee drinks.
There are various ways to tell whether
the coffee grinder is set correctly.
The coffee is ground too coarse, if
– espresso or coffee flows into the cup
too quickly.
– the crema is very pale and uneven.
Set a finer grinder setting.
The coffee is ground too fine, if
– espresso or coffee flows into the cup
very slowly.
– the crema is dark brown.
Set a coarser grinder setting.
To avoid damaging the grinder,
please note the following:
Only adjust the grinder one setting at
a time.
Grind the coffee beans again if you
want to adjust the grinder to the next
setting.
Open the appliance door.
Push the slide control one setting to
the left (for finer grinding) or one
setting to the right (for coarser
grinding).
Close the appliance door.
Opening the appliance resets the
internal counter for emptying the drip
tray and the grounds container.
Empty the drip tray and grounds
container.
Prepare a coffee drink.
After that, you can adjust the grinder
setting again.
The altered grinder setting will not be
used until after the second coffee has
been dispensed.
To Next Page
Loading...
Need help?
General
