Portion size
37
The flavor of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can program the amount of water
to suit the size of your cups and the
type of coffee you are using.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed with these drinks.
Additionally, you can set the portion
sizes for hot milk and milk froth alone.
Each type of drink has a maximum
portion size that can be programmed
into the appliance. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
appliance.
If the water container becomes empty
while making a drink, the appliance
will stop programming the portion
size. The portion size will not be
saved.
There are two ways of initiating the
programming of the portion size:
– By tapping the drink button when you
are preparing a coffee; or
– by selecting Portion size in the
Parameters menu.
The changed portion size is always
saved in the current User profile. The
name of the current profile appears in
the top left-hand side of the display.
Changing the portion size
during drink preparation
Portion sizes for Espresso and
Coffee
Place a cup under the main
dispenser.
Tap or until Change appears in
the display.
Dispensing will start.
You can set the portion size as soon
as Save appears in the display.
When the cup is filled up to the
desired level, tap OK.
From now on the programmed portion
size will be dispensed for this drink.
To Next Page
Loading...
Need help?
General
