EasyManuals Logo
Home>Miele>Vacuum Cleaner>Compact C1

Miele Compact C1 User Manual

Miele Compact C1
Go to English
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
en
43
After approx. 10 - 15 seconds a thin red
line will appear in the left hand side of
the display (dia. 16).
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
Close the dust compartment lid.
Replacing one type of exhaust filter
with another (dia. 12)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b Active AirClean 50 (black)
c AirClean Plus 50 (light blue)
d HEPA AirClean 50 (white)
Do not use more than one exhaust fil-
ter at a time.
When changing the filter please note
1. If you wish to replace exhaust filter a
with filter b, c or d, it is essential that
you remove the filter grille before you
fit the new exhaust filter.
You must also activate the exhaust
filter timestrip indicator (dia. 15).
2. If you wish to replace exhaust filter b,
c or d with filter a, it is essential that
you also fit the filter grille * (dia. 35).
* Filter grille - see "Optional ac-
cessories".
When to change the thread lifters
(not possible on EcoTeQ Plus floor-
heads)
The thread lifters on the suction inlet to
the floorhead can be replaced. Check
them from time to time and replace
them if the pile has worn down.
How to replace the thread lifters
(dia. 38)
Use a suitable screwdriver to remove
the thread lifters from the slots.
Fit new thread lifters.
Cleaning the roller on the AllTeQ
floorhead (dia. 39)
Release the bearing (with bayonet fit-
ting) using a coin.
Press the bearing out, and remove.
Remove the roller.
Remove any threads and hair, replace
the roller and refit the bearing, locking
it back into position.
Replacement parts are available from
your Miele Dealer or from Miele (see
end of booklet for contact details).
Cleaning and care
Always disconnect the vacuum
cleaner from the electrical supply be-
fore cleaning it. Switch off at the wall
socket and unplug it.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a propri-
etary cleaner suitable for plastic.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele Compact C1 and is the answer not in the manual?

Miele Compact C1 Specifications

General IconGeneral
Power controlElectronic
AC input voltage230 V
Maximum input power800 W
Annual energy consumption30.2 kWh
TypeCylinder vacuum
CordlessNo
Cleaning typeDry
Dust capacity3.5 L
Product colorRed
Tube materialMetal
Tube lock typeButton
Dust container typeDust bag
Proper useHome
Noise level77 dB
Cleaning surfacesCarpet, Hard floor
Vacuum air filteringMiele AirClean
Dirt separating methodFiltering
Motor protection filterYes
Cord length5.5 m
Weight and Dimensions IconWeight and Dimensions
Depth250 mm
Width429 mm
Height230 mm
Weight4800 g

Related product manuals