Tone options
A tone can be selected to confirm the
selection of a touch control. The volume
of the tone can also be adjusted.
^
Select "Settings F", confirm with OK.
Settings
Volume
Showroom prog.
^
Tap < or > until "Volume" is
highlighted, confirm with OK.
^
Tap < or > to select "Buzzer tones" or
"Keypad tone", confirm with OK.
^ Tap < or > to increase or decrease
the volume.
If you continue to tap < all the way to
the left until you can no longer see the
small white bars, the sound will turn
off.
^ Tap OK to save the setting.
Showroom program
The showroom program is used to
demonstrate the machine at exhibits. In
this demo mode, the machine lighting is
On, but the machine does not heat up.
Settings
32
To Next Page
Loading...
Need help?
General
