Miele CVA 4066 User Manual

Milk pipework
Rinsing the milk pipework
To prevent the milk residue from
spoiling or drying in the machine and
pipework, you should rinse these lines
after use. In addition to rinsing after
use, the lines need to be cleaned at
the end of the day.
Maintenance
qrHI J L n
m
C
^
Tap < or > until "Maintenance m"is
highlighted, confirm with OK.
^ Select "Rinse milk pipework", confirm
with OK.
^ Select "Start", confirm with OK.
^ Follow the instructions in the display.
To rinse the pipework in the lid of the
stainless-steel milk container, fill the
large cleaning container to the
"max." mark with cold water.
Fit the lid of the stainless-steel milk
container into place on the large
cleaning container.
Place the cleaning container in the
appliance where the milk container
would normally sit.
Cleaning the milk pipework
To prevent milk residue from spoiling or
drying in the machine and pipework, it
should be cleaned at the end of each
day milk was used to make a
beverage.
^
If the milk pipework in the lid is
clogged, clean under running water
using the cleaning brush.
Insert the cleaning brush into the
pipework, and push it in and out.
Maintenance
qrHI J L n
m
C
^ Tap < or > until "Maintenance m"is
highlighted, confirm with OK.
^ Select "Clean milk pipework", confirm
with OK.
^ Select "Start", confirm with OK.
^ Follow the instructions in the display.
Cleaning and care
42

Miele CVA 4066 Specifications

General

Brand	Miele
Model	CVA 4066
Category	Coffee Maker
Language	English