. . . fault message 73 appears in the display.
The brew unit is dirty and cannot be positioned correctly.
^
Touch the "+ C" sensor.
^
Take the brew unit out of the machine and clean it
thoroughly (see "Cleaning and care - Brew unit").
^
Replace the brew unit in the machine and close the door.
If this fault message still continues to appear in the display,
please call the Miele Service department, quoting the fault
code.
. . . the ground coffee chute cover cannot be pushed in
properly.
^ Is the lid of the ground coffee chute closed?
...you can hear "gurgling" or "rushing water" noises.
The water container is being filled with water automatically.
. . . it is difficult to open or close the machine door and the
seal on the connection between the coffee outlet and the
brew unit is out of alignment.
^ Align the door using the hinges
(see "Installation: Adjusting the door hinges").
Problem solving guide
76
To Next Page
Loading...
Need help?
General
