Connecting the water inlet hose to the coffee
machine
^
Remove the cover cap from the bottom of the back panel of
the machine. Connect the angled end of the stainless steel
hose to the threaded connection of the machine. Ensure
that all connections are water tight.
Connection to the water inlet
Before making plumbing connections, ensure the
appliance is disconnected from the mains electricity
supply.
Connection to the mains water supply should incorporate a
mains stopcock with 3/4" thread. The stopcock should be
fitted by a qualified plumber.
^
Connect the stainless steel hose to the stopcock.
^
Ensure that it is screwed into position correctly.
The connection point is subject to mains water pressure.
Turn on the stopcock slowly and check for leaks. Correct
the position of the seal and union if necessary.
The protective sleeve of the hose must not be damaged or
kinked. The water inlet hose must not be shortened or
damaged in any way.
Plumbed in water supply
79
To Next Page
Loading...
Need help?
General
